•  
  •  
 

Chemical Technology, Control and Management

Abstract

The problem of creating a compact refrigeration zone for absorbers with tubular-lattice nozzles made of pipes with spiral turbulators is discussed. Research has been carried out on the influence of the groove depth h/D and α/αгл of the step of their placement t/D on the degree of heat transfer intensification α/αо in the transition region of the gas-liquid flow. An intensification of heat transfer has been achieved only by increasing the groove depth from h/D = 0,003 to 0,095 and the optimal pitch of the grooves, the intensity of heat transfer is 2 or more times. Research has revealed that it is possible to reduce the number of pipes in tubular-lattice nozzles ~ 2 times, which makes it possible to proportionally reduce the overall dimensions of the refrigerating zone.

First Page

05

Last Page

11

DOI

https://doi.org/10.34920/2021.1.5-10

References

  1. V.A. Linkevich, Texnologiya kalsinirovannoy sodi [Soda ash technology]. Tashkent: GAK «Uzkimyosanoat», 2005, 96 p. (in Russian).
  2. B.P. Kondaurov, Obshaya ximicheskaya texnologiya [General chemical technology]. Moskva: Akademiya, 2005, 336 p. (in Russian).
  3. A.I. Leontyev, K.V. Bryankin, Obshaya ximicheskaya texnologiya [General chemical technology]. Tambov: TGTU, 2004, 76 p. (in Russian).
  4. A. Bergles, Intensifikatsiya teploobmena [Heat transfer intensification]. Moskva: Energiya, 1981, 392 p. (in Russian).
  5. Y.P. Chudnovskiy, “Intensifikatsiya teploobmena generatsiyey vixrey” [Intensification of heat exchange of viray generation], avtoref.diss.. kand. texn. nauk., Moskva, 1990, 19 p. (in Russian).
  6. R.L. Xagen, A.M. Danak, “Perenos impulsa pri turbulentnom otrivnom obtekanii pryamougolnoy vpadini” [Momentum transfer in the turbulent outflow flow around a rectangular depression], Prikladnaya mexanika, vol. 33, no. 3, pp. 189-195, 1966 (in Russian).
  7. B.V. Dzyubenko, Y.A. Kuzma-Kichta, L.P. Xolpanov i dr., Intensifikatsiya teplo- i massoobmena v energetike [Intensification of heat and mass transfer in the energy sector]. Moskva: SNIIATOMINFORM, 2003, 232 p. (in Russian).
  8. E.K. Kalinin, G.A. Dreyser, I.Z. Kopp, A.S. Myakochin, Effektivniye poverxnosti teploobmena [Effective heat transfer surfaces]. Moskva: Energoatomizdat, 1999, 423 p. (in Russian).
  9. N.R.Yusupbekov, H.S.Nurmuhamedov, S.G.Zokirov, Kimyoviy texnologiya asosiy jarayon va qurilmalari. Tashkent: Fan va texnologiyalar, 2015, 848 p.
  10. Y.V.Svetlov, Intensifikatsiya gidrodinamicheskix i teplovix protsessov v apparatax s turbulizatorami potoka [Intensification of hydrodynamic and thermal processes in devices with flow turbulators]. Moskva: Energoatomizdat, 2003, 304 p. (in Russian).
  11. Y.F. Gortishov, V.V. Olimpiyev i dr., “Effektivnost promishlenno-perspektivnix intensifikatorov teplootdachi” [Efficiency of industrial-perspective heat transfer intensifiers], Izvestiye AN «Energetika», no. 3, pp.17-24, 2002 (in Russian).
  12. E.K. Kalinin, G.A. Dreyser, S.A. Yarxo, Intensifikatsiya teploobmena v kanalax [Intensification of heat transfer in the channel]. Moskva: Mashinostroyeniye, 1990, 208 p. (in Russian).
  13. V.B. Kuntish, A.N. Bessonniy, G.A. Dreyser, I.F. Yegorov, Primeri raschetov nestandartizovannix effektivnix teploobmennikov [Examples of calculations of non-standardized efficient heat exchangers]. Sankt-Peterburg: Nedra, 2000, 300 p. (in Russian).
  14. B.V. Dzyubenko, G.A. Dreitser, R.I. Yakimenko, “Methodics of Optimum Configuration Choice for Heat Transfer Surfaces of Space Heat Exchangers”, Proc. of the First Int.Conf. on Aerospace Heat Exchangers Techology (Palo Alto, USA, 1998), Amsterdam-London: Elseveir, pp. 369-389, 1998.
  15. G.A. Dreyser, “O nekotorix problemax sozdaniya visokoeffektivnix trubchatix teploobmennix apparatov” [On some problems of creating high-efficiency tubular heat exchangers], Novosti teplosnabjeniya, no. 5, pp.37-52, 2004 (in Russian).
  16. E.T. Mavlanov, X.S. Nurmukhamedov, S.G. Zakirov O.SH. Temirov, “Intensivnost teploobmena pri techenii jidkostey v kanalax so spiralnimi turbulizatorami” [The intensity of heat transfer during the flow of liquids in channels with spiral turbulators], Ximicheskaya texnologiya. Kontrol i upravleniye, no. 1, pp.28-33, 2016 (in Russian).
  17. S.G.Zakirov, E.T.Mavlanov, X.S.Nurmukhamedov, “Intensifikatsiya perenosa tepla pri oxlajdenii rassola v absorberax s trubchato-reshetchatimi nasadkami s razvitoy poverxnostyu” [Intensification of heat transfer during brine oxcooling in the ax absorber with tubular-lattice nozzles with a developed surface], Ximprom, Sankt-Peterburg, no. 3, pp.146-150, 2019 (in Russian).
  18. S.G.Zakirov, E.T.Mavlanov, X.S.Nurmukhamedov, “Gidravlicheskoye soprotivleniye pri techenii vyazkix jidkostey v mejtrubnom prostranstve xolodilnix zon absorbsionnix kolonn” [Hydraulic resistance in a solution of viscous liquids in the inter-tube space of the cooling zones of the absorption columns], Ximicheskaya texnologiya. Kontrol i upravleniye, no. 2, pp.11-16, 2019 (in Russian).
  19. P.I. Bajan, G.YE. Kanevets, V.M. Seliverstov, Spravochnik po teploobmennim apparatam [Handbook of heat exchangers]. Moskva: Mashinostroyeniye, 1989, 366 p. (in Russian).
  20. B.B.Babatullaev, E.T.Mavlanov, Kh.S.Nurmuchamedov, U.V.Mannanov, U.Kh.Sagdullaev, “Control of the Degree of Intensification and Convective Heat Exchange with Flow of Liquids in pipes with turbulators”, Chemical technology. Control and management. Special issue, no. 5-6, pp.43-46, 2020.

Share

COinS
 
 

To view the content in your browser, please download Adobe Reader or, alternately,
you may Download the file to your hard drive.

NOTE: The latest versions of Adobe Reader do not support viewing PDF files within Firefox on Mac OS and if you are using a modern (Intel) Mac, there is no official plugin for viewing PDF files within the browser window.