Article Title

JUSTIFICATION OF THE KINEMATIC MODE OF ROTATION WORKING BODY

Authors

M.A Turakulov, Gulistan State UniversityFollow
A.U Axmedov, Gulistan State University
V.A Ermatov, Gulistan State University
Sh.B Xolboeva, Gulistan State University
K.B Aynakulov, Gulistan State University

Abstract

This article provides a flow chart of the rotation of the working body for leveling the surface of cotton irrigation furrows, depending on the kinematic mode of operation (λ) and on the radius of the pinning point. In the process of work, the rotators of the rotary working body describe the trajectory of absolute movement of an elongated cycloid. The magnitude of the kinematic mode λ is limited on the one hand by the design parameters of the working body, namely the radius of the site, the fastening of the picker.

First Page

18

Last Page

22

References

Лукьянов А.Д. Технологическиу расчет почвообрабаттывающих фрез. // Тракторы и сельхозмашины, 1970. - С. 21-22.

Канарев Ф.М., Донцов В.Б., Ткаченко А.И. Иследование критических режимов работы почвообрабатывающих фрез.- Краснодар, 1969. – С. 142-148.

Канарев Ф.М. Ротационные почвообрабатывающие машины и орудия. Москва 1983, 140 с.

Recommended Citation

Turakulov, M.A; Axmedov, A.U; Ermatov, V.A; Xolboeva, Sh.B; and Aynakulov, K.B (2019) "JUSTIFICATION OF THE KINEMATIC MODE OF ROTATION WORKING BODY," Bulletin of Gulistan State University: Vol. 2019 : Iss. 1 , Article 4.
Available at: https://uzjournals.edu.uz/gulduvestnik/vol2019/iss1/4