The results of the study on the effect of antimony alloy anodic behavior AK12M2 alloy, in a neutral environment (at different concentrations - 0.03; 0.3 and 3.0% NaCl). It should be noted that in all cases, the corrosion potential of samples immersin into a solution after some time shifts in the positive direction and then stabilized. In this case, if the stabilization in undoped alloy corrosion potential is observed within 50 minutes, then in doped alloys it occurs twice as fast, within 25-30 minutes, indicating a relatively higher influence of antimony passivation additives.
1.Ganiev I.N., Osimi Okil, Sangov M.M., Nazarov H.M. The effect of antimony on the corrosion-electrochemical behavior of the AK12 alloy in an electrolyte of 3% NaCl. // Bulletin of the Tajik Technical University named after M.S.Osimi. 2013. No4 (24). рр.47-50. 2. Osimi Okil, Ganiev I.N., Nazarov H.M., Berdiev A.E. The anodic behavior of the AK12 alloy doped with antimony in a NaCl electrolyte. // News of higher educational institutions. Chemistry and chemical technology. 2014.V. 57. Number 7. рр.84-87. 3. Osimi Okil, Nazarov H.M., Ganiev I.N. The effect of antimony on the anodic behavior of AK12M2 alloy in a medium of 0.3% NaCl solution. // Proceedings of the uni- versities of Kyrgyzstan. 2017. No1. рр.10-13.
Nazarov, H.M. and Osimi, Okil
"ANODIC DISSOLUTION OF ALLOY AK12M2 DOPED BY ANTIMONY IN AQUEOUS SOLUTIONS OF SODIUM CHLORIDE,"
Gorniy vestnik Uzbekistana: Vol. 2020
, Article 4.
Available at: https://uzjournals.edu.uz/gorvest/vol2020/iss1/4