•  
  •  
 

Scientific-technical journal

Abstract

The article analyzes the optical and thermal characteristics of a solar parabolic-cylindrical collector (PCC). Effective parameters such as geometric concentration, aperture width, coverage angle, receiver diameter, and focal distance are considered. Simulation results are presented via Monte Carlo ray tracing (MCRT) method. The factors influencing the distribution of the heat flux at the receiver are revealed.

First Page

8

Last Page

17

References

[1] G. K. Manikandan, S. Iniyan, and R. Goic, “Enhancing the optical and thermal efficiency of a parabolic trough collector – A review,” Applied Energy. 2019, doi: 10.1016/j.apenergy.2018.11.048. [2] L. Valenzuela, R. López-Martín, and E. Zarza, “Optical and thermal performance of large-size parabolic-trough solar collectors from outdoor experiments: A test method and a case study,” Energy, 2014, doi: 10.1016/j.energy.2014.04.016. [3] B. Zou, H. Yang, Y. Yao, and Y. Jiang, “A detailed study on the effects of sunshape and incident angle on the optical performance of parabolic trough solar collectors,” Appl. Therm. Eng., 2017, doi: 10.1016/j.applthermaleng.2017.07.149. [4] B. Zou, Y. Jiang, Y. Yao, and H. Yang, “Optical performance of parabolic trough solar collectors under condition of multiple optical factors,” Appl. Therm. Eng., 2019, doi: 10.1016/j.applthermaleng.2019.114070. [5] C. Zhang, G. Xu, Y. Quan, H. Li, and G. Song, “Optical sensitivity analysis of geometrical deformation on the parabolic trough solar collector with Monte Carlo Ray-Trace method,” Appl. Therm. Eng., vol. 109, pp. 130–137, Oct. 2016, doi: 10.1016/j.applthermaleng.2016.08.058. [6] H. Hoseinzadeh, A. Kasaeian, and M. Behshad Shafii, “Geometric optimization of parabolic trough solar collector based on the local concentration ratio using the Monte Carlo method,” Energy Convers. Manag., 2018, doi: 10.1016/j.enconman.2018.09.001. [7] H. Liang, S. You, and H. Zhang, “Comparison of three optical models and analysis of geometric parameters for parabolic trough solar collectors,” Energy, 2016, doi: 10.1016/j.energy.2015.12.050. [8] B. Zou, J. Dong, Y. Yao, and Y. Jiang, “A detailed study on the optical performance of parabolic trough solar collectors with Monte Carlo Ray Tracing method based on theoretical analysis,” Sol. Energy, 2017, doi: 10.1016/j.solener.2017.01.055. [9] J. Song, K. Tong, L. Li, G. Luo, L. Yang, and J. Zhao, “A tool for fast flux distribution calculation of parabolic trough solar concentrators,” Sol. Energy, 2018, doi: 10.1016/j.solener.2018.07.068. [10] A. M. Daabo, S. Mahmoud, and R. K. Al-Dadah, “The optical efficiency of three different geometries of a small scale cavity receiver for concentrated solar applications,” Appl. Energy, 2016, doi: 10.1016/j.apenergy.2016.07.064. [11] J. T. Pytilinski, “Solar energy installations for pumping irrigation water,” Sol. Energy, 1978, doi: 10.1016/0038-092X(78)90001-4. [12] İ. H. Yılmaz and A. Mwesigye, “Modeling, simulation and performance analysis of parabolic trough solar collectors: A comprehensive review,” Applied Energy. 2018, doi: 10.1016/j.apenergy.2018.05.014. [13] Y. L. He, K. Wang, Y. Qiu, B. C. Du, Q. Liang, and S. Du, “Review of the solar flux distribution in concentrated solar power: Non-uniform features, challenges, and solutions,” Applied Thermal Engineering. 2019, doi: 10.1016/j.applthermaleng.2018.12.006. [14] B. Lamrani, A. Khouya, B. Zeghmati, and A. Draoui, “Mathematical modeling and numerical simulation of a parabolic trough collector: A case study in thermal engineering,” Therm. Sci. Eng. Prog., 2018, doi: 10.1016/j.tsep.2018.07.015. [15] A. Mwesigye, Z. Huan, T. Bello-Ochende, and J. P. Meyer, “Influence of optical errors on the thermal and thermodynamic performance of a solar parabolic trough receiver,” Sol. Energy, 2016, doi: 10.1016/j.solener.2016.06.045. [16] A. J. Abdulhamed, N. M. Adam, M. Z. A. Ab-Kadir, and A. A. Hairuddin, “Review of solar parabolic-trough collector geometrical and thermal analyses, performance, and applications,” Renewable and Sustainable Energy Reviews. 2018, doi: 10.1016/j.rser.2018.04.085. [17] J. A. Duffie and W. A. Beckman, Solar Engineering of Thermal Processes: Fourth Edition. 2013. [18] M. A. Hassan, “An Optimized Optical Model of Parabolic Trough Solar Collector Using MCRT Method,” no. August, 2015, doi: 10.13140/RG.2.2.31989.06884. [19] Z. D. Cheng, Y. L. He, F. Q. Cui, B. C. Du, Z. J. Zheng, and Y. Xu, “Comparative and sensitive analysis for parabolic trough solar collectors with a detailed Monte Carlo ray-tracing optical model,” Appl. Energy, 2014, doi: 10.1016/j.apenergy.2013.11.001. [20] A. Mwesigye, T. Bello-Ochende, and J. P. Meyer, “Minimum entropy generation due to heat transfer and fluid friction in a parabolic trough receiver with non-uniform heat flux at different rim angles and concentration ratios,” Energy, 2014, doi: 10.1016/j.energy.2014.06.063.

Share

COinS
 
 

To view the content in your browser, please download Adobe Reader or, alternately,
you may Download the file to your hard drive.

NOTE: The latest versions of Adobe Reader do not support viewing PDF files within Firefox on Mac OS and if you are using a modern (Intel) Mac, there is no official plugin for viewing PDF files within the browser window.